b
In the
Community Name
field, enter
D
.
c
Click
Add
.
10
In the
SNMP Service Configuration
window, add another community:
a
From the
Community rights
drop-down list, select
READ ONLY
.
b
In the
Community Name
field, enter
public
.
c
Click
Add
.
11
Select
Accept SNMP packets from these hosts
.
12
If
localhost
in not listed in the list of accepted hosts, perform the following actions:
a
Under the list, click
Add
.
b
In the
Host name, IP or IPX address
field, enter
localhost
. Click
Add
.
13
In the
Security
tab, click
Apply
.
14
In the
Traps
tab, in the
Community name
drop-down list, enter
M
. Click
Add to list
.
15
Under the
Trap destinations
list, click
Add
.
16
In the
Host name, IP or IPX address
field of the
SNMP Service Configuration – Traps
window, enter
127.0.0.1
and click
Add
.
17
In the
Traps
tab, click
Apply
.
18
Click
OK
.
Configuring Primary DNS Suffix
Configure the primary Domain Name Service (DNS) suffix for an MCC 7100 IP Dispatch Console
inside the ASTRO
®
25 Radio Network Infrastructure (RNI).
NOTICE:
Do not follow this procedure for MCC 7100 IP Dispatch Consoles outside the
ASTRO
®
25 RNI. If you have an MCC 7100 IP Dispatch Console outside the ASTRO
®
25 RNI
that is on the Customer Enterprise Network (CEN) domain, verify that it meets one of the
following conditions:
• They are installed in an ASTRO
®
25 System Release 7.11.
• They are installed in an ASTRO
®
25 System Release 7.13 or later, and the suffix was input
as part of the hostname in the Provisioning Manager.
If it meets one of the following conditions, enter the DNS suffix for the ASTRO
®
25 domain in
the Console Status application of this console. See
ASTRO Domain Configuration on page
Procedure:
1
In the
Run
window of the Windows operating system, enter
sysdm.cpl
. Press E
NTER
.
2
In the
Computer Name
tab, click
Change
.
3
In the
Computer Name/ Domain Changes
window, click
More
.
4
In the
DNS Suffix and NetBIOS Computer Name
window, perform the following actions:
a
In the
Primary DNS suffix for this computer
field, enter the DNS suffix in the form of
nmd
<S>
.zone
<Z>
where
<S>
is the console site ID and
<Z>
is the zone ID.
IMPORTANT:
This DNS suffix naming convention is valid only for consoles inside the
ASTRO
®
25 RNI.
MN000672A01-E
Chapter 2: MCC 7100 IP Dispatch Console Setup and Installation
49
Summary of Contents for MCC 7100 IP
