2.4
Installing the Power Cable
Procedure:
1
Remove the shielded power cable from solar panel housing.
2
Slide the female connector end of the shielded power cable through the bottom left hole of the
security enclosure.
Figure 7: Power Cable Female Connector End
2.5
Connecting the Solar Panel Battery Lead
Procedure:
1
Unscrew the bolt from the rear of the solar panel.
2
Rotate the solar panel forward to expose the battery.
Figure 8: Exposing the Battery Compartment
3
Slide the red battery lead onto the red terminal.
NOTICE:
Make sure the hinge engages on the rear of the battery compartment and
rotate the solar panel back.
MN007598A01-AD
Chapter 2 : Getting Started
13
