Scan
Your radio cycles through the programmed scan list for the
current channel looking for voice activity when you start a
scan.
Your radio also performs dual-mode scan. If you are on a
digital channel, and your radio locks onto an analog
channel, your radio automatically switches from digital
mode to analog mode during the call. If you are on an
analog channel, and your radio locks onto a digital channel,
your radio automatically switches from analog mode to
digital mode during the call.
Table 4: Scan types
Type
Description
Main Channel Scan (Man-
ual)
Your radio scans all the
channels or groups in
your scan list. On entering
scan, your radio may, de-
pending on the settings,
automatically start on the
last scanned active chan-
nel or group, or on the
Type
Description
channel where scan was
initiated.
Auto Scan (Automatic)
Your radio automatically
starts scanning when you
select a channel or group
that has Auto Scan ena-
bled.
Turning Scan On or Off
Press the programmed
Scan
button.
If Scan is enabled, your radio shows the following
indications:
• A positive tone sounds.
• The yellow LED blinks.
If Scan is disabled, your radio shows the following
indications:
• A negative tone sounds.
• The yellow LED extinguishes.
English
24
