7A
7B
41
°
37
°
L
H
EN
EN
05. PROGRAMMING
05. PROGRAMMING
DETECTION AREA ADJUSTMENT
WIDTH ADJUSTMENT
Adjust the detection module up or down to determine how close the detection area is to the door.
Adjust the detection module to the left or right to obtain the desired side detection area.
Ex: In the diagram below, a detection field is shown at a mounting height of 2.2 meters in the two
width adjustment modes.
Sensitivity is adjustable by
adjusting the potentiometer on
the sensor body.
When shipped from the factory,
the sensor is at the maximum
sensitivity value.
REGULATE SENSITIVITY
90°
01
• Rotate the sensor module
in the direction of the arrow
while holding the module
support with the other hand.
02
• Remove the upper part of
the sensor towards you.
03
• Rotate the sensor module
by 90° and insert it back into
the support.
m
m
m
m
Vertical angle of
the sensor module
Horizontal angle of
the sensor module
Left angle rotation: 15°
(max. 30°)
Right angle rotation: 15°
(max. 30°)
Front angle rotation: 0°
