5
1
2
3
4
2
3
1
2
4
A
4
EN
03. INSTALLATION
INSTALLATION AND CONNECTIONS
Power supply
CONNECTIONS:
Exit
Yellow wire
Yellow wire
Gray wire (12~30V DC)
Gray wire (12~24V AC)
FIX THE FIXING BRACKET
Fix the fixing bracket with the screws provided in the kit.
FIX THE RADAR
Tilt the sensor module angle up-down-left-right to modify the detection
area. Put the cover to close the radar.
PROGRAM THE RADAR
Connect the power cable to the radar body. See figure A.
To guarantee the correct functioning of the RAP50, pay attention to the following instructions:
•
Disconnect the power during installation as it may damage the device or cause damage to its
functioning;
•
Avoid moving objects near the detector;
•
Avoid heavy rain and snow;
•
Install in a place where there is no vibration;
•
Avoid fluorescent light sources.
DRILLING
Attach the mounting mold and drill the fixing holes (3.5 mm) and the wires
passage (10 mm).
