10A
10B
EN
EN
05. INSTALLATION
INSTALLATION PROCESS
05. INSTALLATION
INSTALLATION PROCESS
07 •
Apply automation in the fixing plate and
aim the screws.
01 •
Remove the 4 screws from the sides of the
automation and remove the cover.
09 •
Apply the cover on the automation and
tighten the screws.
03 •
Slide the automation to the left and sepa-
rate it from the fixation plate.
08 •
Slide the automation to the right and se-
cure it with the 6 screws.
02 •
Remove the 6 screws which hold the au-
tomation to the wall fixation plate.
10 •
Secure the arm on the automation and
set the correct position of the guide to fix it
in the door.
04 •
Put the plate against the wall and make
the markings (pay attention the measures).
11 •
Move the door manually to set the
position of the opening stopper.
05 •
Make the drillings.
06 •
Place the fixing plate directed with the
holes and secure it with screws.
76mm
Inside opening
Outside opening
