66
MENÚ SETUP [CONFIG.]
The entry in the set-up menu is only possible when the vehicle is estopped
by pushing at the same time the Mode and the Set button for about 04
seconds regardless the visualized function.
On the display the “SET Par” logo will appear fixes for the entry in the
set-up menu of parameters.
Observation: If the input #5 (settings) on the conector is connected to
ground, it is possible to change every parameter.
If the imput #5 (settings) on the connector is not connected to ground
(default condition), it is only possible to change measurement unit.
Distance unit measurement regulation
The display the symbols km/h and mph will be shown and the selected
value will be shown first blinking (f=1Hz, Duty=50%).
Pressure on Set button causes the change in shwn blinking unit, while
the Mode button pressure, in correspondence of blinking unit, allows to
select the same unit and the passage to following screen (or going out
from regulation, depending on #5 input).
The onformation concerning the selected measurement unit is saved in
memory.
