57
Instant speed function
If measurement unit is km/h (default value) the corresponding digit is
visualized; if You push the button and entering the Set-Up it is possible to
select mph unit of measurement.
The function scrolling is always possible (it means the passage from one function to the following one) with the vehicle
stopped or not. To update the instrumentation with the new function, it’s enough briefly pushing the button (tmin = 1
sec.), when it will be left the display will show the new function.
The setting to zero of TD, of the chronometer, of the average and max. speed can be done both with the vehicle stopped
or in movement as described in the previous paragraphs. Clock regulation is possible only when vehicle is stopped.
The entering in the Set-up menu is possible only when the vehicle is stopped by pushing at the same time the two buttons
for about 4 seconds; the back-up of all data will be done only when the Mode and Set buttons (it depends on selected
set up chosen) will allow the exit from the Set-up menu.
