MotorGuide TOUR 109, Operation Maintenance Installation Warranty Manual

Page: 71 / 76

Propeller Replacement
!
WARNING
Performing service or maintenance without first disconnecting the battery can
cause product damage, personal injury, or death due to fire, explosion,
electrical shock, or unexpected motor starting. Always disconnect the battery
cables from the battery before maintaining, servicing, installing, or removing
motor components.
REMOVING THE PROPELLER
1. Disconnect the power cables from the battery.
IMPORTANT: Remove the propeller nut with a wrench or a ratchet and socket.
Using another tool may damage the propeller nut or shaft. If the propeller
cannot be removed easily, use a rubber mallet to lightly tap the back side of
the opposite blade. If the propeller cannot be removed, have the propeller
removed by an authorized dealer.
NOTE: Replace the propeller pin if it is bent.
2. While holding the propeller blade with one gloved hand, use a 9/16 in.
wrench or a ratchet to remove the propeller nut. Remove the propeller nut
and washer.
a - Propeller
b - Propeller nut and washer
INSTALLING THE PROPELLER
1. Rotate the motor shaft to insert the propeller pin horizontally.
a - Propeller pin
b
a
70027
a
44664
MAINTENANCE
eng
65