manualshive.com logo in svg

MotorGuide TOUR 109, Operation Maintenance Installation Warranty Manual

Share
Download
MotorGuide TOUR 109 Operation Maintenance Installation Warranty Manual Download Page 5

Warranty Information

Disclaimers, Limitations, and Waivers................................................................ 1

MotorGuide Limited Three Year Warranty.......................................................... 2

General Information

Boater's Responsibilities..................................................................................... 4

Protecting People in the Water........................................................................... 4

Passenger Safety Message................................................................................ 4

Safe Boating Suggestions.................................................................................. 4

Product Overview

Box Contents...................................................................................................... 6

Tour Pro 82/Tour Pro 109 MotorGuide Trolling Motor........................................ 9

Specifications....................................................................................................10

Wiring and Battery Information

Wiring and Battery Information......................................................................... 11

Recommended Practice and Procedures......................................................... 11

Battery Recommendations............................................................................... 11

Battery Precautions.......................................................................................... 12

Wire and Cable Routing....................................................................................12

Wire Color Code Abbreviations........................................................................ 13

Battery Connection........................................................................................... 13

eng

iii

  

Summary of Contents for TOUR 109













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands