manualshive.com logo in svg

MotorGuide 940300030, Manual, Page: 27 / 31

Share
Download
MotorGuide 940300030 Manual Download Page 27

IMPORTANT: Do not paint the anode or clean it with steel wool, sandpaper, wire

brushes, or other abrasive materials. Replace the anode if it is more than 50%

eroded.

a -

Propeller

b -

Anode (saltwater models only)

c -

Washer

d -

Propeller nut

Propeller Replacement

!

 WARNING

Performing  service  or  maintenance  without  first  disconnecting  the  battery  can

cause product damage, personal injury, or death due to fire, explosion, electrical

shock, or unexpected motor starting. Always disconnect the battery cables from the

battery before maintaining, servicing, installing, or removing motor components.

REMOVING THE PROPELLER

1. Disconnect the power cables from the battery.
2. While holding the propeller blade with one gloved hand, use a 9/16 in. wrench

or a ratchet to remove the propeller nut. Remove the propeller nut and washer

(or anode, for saltwater models).

IMPORTANT: Remove the propeller nut with a wrench or a ratchet and socket.

Using another tool may damage the propeller nut or shaft. If the propeller cannot be

removed easily, use a rubber mallet to lightly tap the back side of the opposite

blade. If the propeller cannot be removed, have the propeller removed by an

authorized dealer.

a

b

c

d

62099

MAINTENANCE

eng

21

  

Summary of Contents for 940300030
































Reviews:

No comments