Safe mobile phone call function
1) Receive a phone call automatically
With an incoming a phone call, you will hear the ring on the mobile phone and about 3-5 seconds later, the
RCMI
will receive the call automatically.
2) Terminate phone call
When you finish talking on the phone, a short press of the Phone/Play Key will terminate the call.
3) Reject a phone call
When you receive an incoming phone call, you will hear the ring, within 1 second, immediately press the
Phone/Play key and it will reject the call.
Set up for bike- to- bike and rider-to-pillion intercom: pairing
Pairing is a one time process that is required for mutual recognition between a
RCMI
and other
RCMI
.
Once the
two headsets are paired, they will retain paired whenever they are
within range
.
Please note that you can speak via intercom to one persons headset at a time.
Note
:
B.
When you are pairing two
RCMI
s, you must keep other
RCMI
s in the off status.
C.
Please pair the RCIMs
only by the buttons on the main unit. Don’t pair them by the remote control.
D.
You can pair your
RCMI
with maximum total of four
RCMI’
s
.
1) Pairing two
RCMI
s
If you only need to communicate with one person (rider to pillion or bike to bike), you can simply pair
two
RCMI
s according to the below steps:
Power on
RCMI
A
(the blue LED of
RCMI
A
will flash), power on
RCMI
B
(the blue LED of
RCMI
B
will
flash).
Simultaneously hold the
B
key on
RCMI
A
and hold the
A
key
on
RCMI
B
until the red & blue LED of the both
pairing
RCMI’
s
flash,
short press
the
B
key
on
RCMI
A
, and
5-9 seconds later the red LED of both
RCMI’
s
will extinguish and the blue LED will then flash briefly every 2-5 seconds, thus they have finished the pairing
process, (now you can talk to each other).
--------------------------------------------------------------------------- 9 ---------------------------------------------------------------------
