background image

 

 

Operation: 

The operation is friendly and very easy. 

Pairing with your Bluetooth phone for the first time

 

Note:  

 

You must have a Bluetooth enabled phone to “Pair” with the

 

RCMI

.

 

 

Before  using  the 

6RMI

,  please  familiarize  yourself  with  Bluetooth  function  of  your  mobile  phone.    Read  the 

instruction 
manual that came with the phone so you can enable its Bluetooth function.   
Before you can use this 

RCMI

 in combination with your phone , you will need to “pair” it with your cell phone for the 

first time. This usually only needs to be performed once with that individual phone however follow the instructions 
supplied by the phone manufacturer and save the “pairing” so it will be automatically connect when your phone and 
the 

RCMI

 come into contact.   

A. 

Please pair the RCIM with the phone 

only by the buttons of the main unit. Don’t pair them by the   

remote control. 

1)  Enable the Bluetooth function on your mobile phone. 

Short press(< 1 second) Reset key on the

 

RCMI

.  

                      

2)  You must place the 

RCMI

 in “Pairing mode”, this is done by way of holding down the Power/Interphone 

key on the headset until the red & blue LED flash alternately.  

3)  Begin the “searching for Bluetooth device” on your mobile phone according to the phone’s instructions. 

4)  When the

 

RCMI

 is discovered, the mobile phone will display

 

MOTOR PHONE,

 

select this and accept the 

connection. 

5)  Your  mobile  phone  will  ask  you  to  input  a  password  to  enable  this  connection,  when  prompted  input 

password :  0000  (four zeros) 

6)  Your phone will confirm that pairing has succeeded. Note that the only light showing on the headset is now  

blue and it will flash once every 5 seconds. 

  

Turn on           

  

 

Short press(< 1 second) Reset key on the 

RCMI

.

 

p

Press the Power/ RIDER A key for 6 seconds or so,  

u

until the blue light illuminates,  promptly release the 

 

Power/Interphone key, then the blue led light will flash   

e

every 2-5 seconds, and you can see that on the  

s

screen of your mobile phone the 

RCMI

 will ask your  

c

phone to connect with it , select ”yes” on your phone.  

Increase the volume

   

Short press of the V+ key 

Reduce the volume 

  

 

Short press of the V- key 

 
 
 
 

-----------------------------------------------------------------------  8  ---------------------------------------------------------------------

 

Summary of Contents for 4R















Reviews: