Motor Power Company DUET_FL 48/10, User Manual

Page: 152 / 196

Page 152
When the servo positioning controller is reset, the contents of the FLASH memory are copied into the
RAM. A reset can be initiated as follows:
 Deactivation and reactivation of the power supply

Activation of the menu item File/Reset Servo
 Activation of the RESET button in the toolbar of the parameterization program
The DUET_FL also has default parameter set . This parameter set is fixed in the firmware and cannot
be overwritten. If a parameterization is not successful for some reason, the default parameter set can
be loaded to continue with default values. The default parameter set is activated by selecting
File/Parameter set/Load default parameter set . The default parameter will then be copied into the
FLASH memory and into the RAM.
Loading and saving parameter sets
Parameters can also be stored and managed externally (i.e. on a hard disk or floppy disk etc.). The
parameter set is read by the DUET_FL servo positioning controller and saved to a file, or it is read from
a file and saved in the DUET_FL servo positioning controller.
The extension of the parameter files on the PC end is *.DCO . The following menus of the
parameterization program are used for reading and writing of the *.DCO files:
 File/Parameter set/File >> Servo : This command transfers a *.DCO file from the PC to
the servo
 File/Parameter set/Servo >> File : This command writes a *.DCO file to the PC
Please note that when writing a parameter set to a file on the PC, you can fill in the fields Motor type
and Description . You can also enter a comment of up to 100 lines if you select the Comments tab.
We highly recommend generating descriptions to prevent confusions of parameter sets. The name of
the parameter set should also be selected carefully to facilitate finding the right file.
Please use the comment fields to save information.
*.DCO files can be sent from one location to another on floppy disks, CD-ROMs and/or by
e-mail.
User Manual DUET_FL „DUET_FL 48/10“ Version 1.1 Motor Power Company