© Motor City Wash Works, Inc. 48285 Frank, Wixom Michigan 48393 U.S.A.
Phone: 248.313.0272 ▪ Fax: 248. 313.0271
REVISION 2.3 10-07-20
www.motorcitywashworks.com
6
Locate
the boxes containing the
COLOR SKINZ™
covers and install on each leg..
Pic #9 Color Skinz™ Pic #10 Color Skinz™
Cotton Cloth™ Loading Instructions
Unbolt
the hub from the wheel and remove the two compression plates from the top of the hub. Verify that
the plastic spacers are correctly installed in each hub channel (See Picture Below)
Pic #11: Cotton Cloth™ Loading
Open
the washing material boxes and load in first
FOUR 3/4” SPACERS
and
ONE COTTON CLOTH™
onto the bottom of the hub assembly. Load
THREE
SPACERS
on top of the cloth and slide on an additional
COTTON CLOTH™
(see Picture #11). Alternate between three spacers and the cloth rings until you have
10 COTTON CLOTH TOTAL
. Terminate with three spacers. Reinstall the two compression plates and
reinstall the hub back to the wheel shaft.
Pic #11: Cotton Cloth™ Loading
SELECT THE
PROPER COLOR
SKINZ™ COVER.
SNAP ONE SIDE OF
THE LIP, SLIDE
THE COVER
AROUND THE LEG
AND FINALLY
SNAP THE
SECOND LIP PAST
THE EXTRUSION
EDGE (see Picture
#10)
COMPRESSION PLATES
SPACERS
10 COTTON CLOTH™
