© Motor City Wash Works, Inc. 48285 Frank, Wixom Michigan 48393 U.S.A.
Phone: 248.313.0272 ▪ Fax: 248. 313.0271
8MANULWRPINS002 12-11-2020
www.motorcitywashworks.com
24
Foamers Connections:
Bring ONE
1/2" OD and ONE 3/8” OD
polyflow tube from a dilution station to the
MIDDLE OF THE TOP
CROSS BEAM
and connect to the existing push-on fittings (see Picture # 40).
NOTE:
THE DILUTION STATION SHOWN IN
PICTURE #38 IS NOT INCLUDED WITH YOUR
MINIWRAP™ WRAP AROUND UNIT;
IT CAN BE PURCHASED SEPARATELY THROUGH
YOUR LOCAL MCWW DISTRIBUTOR
(PART# FOAMDLUTNSTN0001).
1/2" SOLUTION LINE
3/8" AIR LINE
Pic #40 Streamers Air-Solution Lines
Hydraulic Installation:
Your MCWW MINIWRAP™
requires a
HYDRAULIC SUPPLY CAPABLE OF 6 GPM @ 1000 PSI
connected to two hoses (one pressure and one return line) located on each arm on the entrance side of
the head frame.
Use the HYDRAULIC SCHEMATIC
shown in Picture #41 as an installation guide.
WARNING
!
DO NOT OPERATE YOUR MINI™ WRAP
AROUND UNIT WITH A HYDRAULIC SYSTEM OPERATION AT
A PRESSURE ABOVE 1250 PSI.
FOAM STREAMERS
