7
ASSEMBLY
3
4
Fig. a
Install Ram
Upper Ram
Pin (22)
Lower Ram
Pin (7)
Ram (19)
R- Clip (6)
Safety Lock Lever (14)
Fig. b
Fig. c
Lift Arm/Shaft
Aeembly
Base (1)
Bolt (10)
Lock
Washer (9)
Washer (17)
Nut (8)
Position the Ram in Lift Arm I Shaft Assembly as shown.
Press the pump piston rod to the proper position with the foot pedal and install it as
shown in the figure.
Slide Lower Ram Pin (7) through the shaft bracket and the clevis base of the Ram (19).
Slide Upper Ram Pin (22) through the bracket on the Lift Arm and the top of the Ram (19).
Place Washer (17) over the end of each Pin.
Secure each Pin with an R-Clip (6).
Move the two Safety Lock Levers (14) to locked position as shown in Fig.c.
Place the Lift Arm I Shaft Assembly onto the wheeled end of the Base (1 )
as shown and align the bolt holes.
Secure the Lift Arm I Shaft Assembly to the Base using two Bolts (10), Washer (17)
Lock Washers (9), and Nuts (8).
Connect Lift Arm / Shaft Assembly to Base
Washer (17)