14 Safety instructions
The
motoscope mini
provides a lot of information at one time. Users consequently require a
certain "training" period in order to recognise all the given information quickly and correctly.
Please take this into account, particularly during your first rides with the
motoscope mini
and do
not distract yourself by watching the instrument in public traffic.
The user of the instrument is responsible for the correct entry of all relevant data as well as for
the adjustment of the speedometer and all other functions. In particular, the fitting of the dry
reed contact as well as the input of all calculation factors for speed determination, such as the
wheel circumference and the triggered impulses per wheel revolution, must be set with great
care. The user is also responsible for mounting the instrument, the sensors, and all other
accessory parts to the vehicle correctly and securely.
15 Trouble shooting
15.1 After the installation
•
switch the ignition/vehicle system voltage “ON” and “OFF” for some seconds
•
check functions with the motor on and off
•
vehicle battery should be charged sufficiently and the vehicle system voltage must be
higher than 7 V
•
check all cables, connections, and sensors for correct installation and good contacts
•
check all cables, connections, and sensors for correct polarities and/or short-circuits
•
make sure that your vehicle has an interference suppressed ignition system and
interference suppressed spark plugs. In case of doubt ask your motorcycle dealer
•
Running
the
motoscope mini
with an ignition system and/or spark plugs that are not
interference suppressed may damage the device!
•
If the above-mentioned attempts do not help, switch OFF the ignition/voltage supply and
separate the sensor cable, the push button cable, and the ignition impulse cable from the
device. Then re-check the polarity and connect the voltage supply only
•
Watch the instrument display for a correct indication of the standard display. If it does not
appear, read the recommendations in section 15.2
•
In case of a suspected software malfunction we suggest as a first step resetting all data
to their default values. If you still have no success try resetting all values
15.2 Malfunctions in general
If the tips listed above do not help to solve the problem go to www.motogadget.de where you
will find further information and advice under “support”.
If the problem remains, contact us directly under [email protected]. When contacting us
make sure that you have your customer number (see invoice/bill), the series number of the
device (shown on the back side of the instrument), the software version, the date of purchase,
and your vehicle data (make, brand/model, year of construction, type of ignition, etc.).
The
motogadget
team wishes you pleasant and safe riding, and lots of
fun with your new
motoscope mini
.
11
