Page 20
Page 21
Using the Trim function to reduce veering
Using the Trim function to reduce veering
The trim function on the S7 REMOTE trolley can be used to rectify veering caused by factors
such as uneven weight distribution of the bag.
To adjust the trim, simply hold down the ‘Function’ button and press the ‘Left (<)’ or ‘Right (>)’
buttons to trim the power delivered to each motor.
Pressing the ‘Left (<)’ button will compensate for a trolley veering to the right and vice-versa.
During this process, the level of trim will be indicated by the green LED’s on the handle and
show whether the trim is set to the left (left LED) or right (right LED).
Holding down the ‘Function’ button will show the direction that the trolley is currently trimmed to.
Please note: The trim level is not applied whilst operating at low speeds.
Using the USB Charging Port
Using the USB Charging Port
This Motocaddy trolley features a USB charging port designed to power GPS devices during your round.
Simply remove the covering cap and plug a USB cable into the charging port located on the underside of the handle.
The device will continue charging for the duration of time that the cable is attached and the battery is connected.
It is important to note that the speed of charge will be lower than that of a mains AC charger and similar to plugging the
device into a PC.
The USB charger takes power from the main trolley battery and continuous charging will reduce the battery capacity between
charges. The trolley is designed to disable the USB port when the battery capacity reaches a preset level.
