Dirt Blade Wear Bar
Snow Plow Wear Bar
F
3/8" x 1.25" Carriage Bolt (9X)
3/8-16 Nylock Nut (9X)
Assembling the Wear Bar to the Main Plow Blade
For Shipping purposes, the Snow and Dirt Wear Bars have been installed onto the
Main Plow Blade in the factory. This reduces the possibility of damage to packaging or
other Lift System components.
Depending on the end users preference and desired use for the plow, it will required
you to remove the Wear Bar attachment hardware and remove the wear bar that you
are not intending to use. Once this is completed, reassemble with the hardware
removed prior, to secure wear bar of your choice.
23001 Industrial Blvd, Rogers, MN 55374
1-866-527-7637 (toll free)
www.motoalliance.com / [email protected]
8