Fig 3
Fig 5
Fig 2
Fig 4
Fig 2.
Swivel Plate
Trip Spring
Fig 3.
Fig 5.
Fig 4.
Fig 2
Fig 4
S
3/8" Hex Nut
3/8" Flat Washer
3/8" Eye Bolt
3/8" Hex Nut
3/8" Flat Washer
Blade Stop Collar
3/8" x 1.50" Hex Bolt
Attaching Trip Springs and Eye Bolts to Plow Blade
Proceed with securing the Trip Springs and Eye Bolts to Blade Assembly.
Parts Required - (4) 3/8" Hex Nuts, (4) 3/8" Flat Washers, (2) Trip Springs, Plow Assembly
Pre Assembled
.
Insert (1) 3/8" Hex nut and (1) 3/8" Flat Washer each eye bolt as shown (Fig 1)
1.
Hook spring as shown onto the main Swivel Plate of the Plow Assembly (Fig 2)
2.
Hook other end of Trip Spring onto the end of the Eye Bolt (Fig 3)
3.
Once Trip Spring is hooked onto Eye Bolt, Slide threaded end of Eye Bolt thru hole in Blade
4.
Assembly and secure with 3/8" Washer and 3/8" Hex Nut.
Fig 5 - Secure Blade Stop Collar with (1) 3/8-16 x 1.50" Hex Bolt and (1) 3/8" Nylock Nut. Repeat for
5.
other side.
Fig 1.
23001 Industrial Blvd, Rogers, MN 55374
1-866-527-7637 (toll free)
www.motoalliance.com / [email protected]
7