Page 4
14. Flash button –
during a call, to access telco’s calling features
.
15. Mute with indicator –
to mute transmitter, LED is on when active
.
16.
Ã
button –
to connect or to disconnect voice path to headset
.
17. Redial/Pause button
18. Hold with indicator –
to put a call on hold, LED is on when active
.
19. Goodbye –
to hang up a call at any time
.
20. Speaker –
to activate or to deactivate speakerphone
.
21. Menu –
to set telephone operation parameters
.
22. Save –
to begin programming of memory buttons or directory
.
23. Delete –
to delete one or all records in caller ID log or directory
24. M1 – programmable memory button
25. M2 – programmable memory button
26. M3 – programmable memory button
27. M4 – programmable memory button
28. M5 – programmable memory button
29. M6 – programmable memory button
30. Messages button –
to dial voice mailbox access code
.
31. index card
32. Speakerphone indicator
Installation
1. Plug one end of the flat telephone line
cord into the line jack on the back of the
phone where it is labeled "
TEL.LINE
" and
plug the other end into your modular
telephone wall jack.
2. Connect the AC adapter to an electrical
wall outlet and then connect the AC adapter
plug to the “
DC 9V”
jack on the back of the
phone.
Use only with a Class 2 power
source, plug polarity, 9V DC, AC
adapter.
3. Connect one end of the coiled
Handset Cord
to the jack on the left side of the phone
and connect the other end of the coiled Handset Cord to the jack on the handset
4. If you wish to use an Answering Machine, Modem, Fax Machine or other devices
along with your Caller ID telephone, you may plug one of these devices into the "
DATA
"