MOTO GUZZI V9 Bobber 2016 Owner'S Manual Download Page 58

Page: 58 / 126

15±0.5 l (3.30±0.11 UK gal; 3.96±0.13 US gal)

Fuel tank reserve

4±0.5 l (0.88±0.11 UK gal; 1.06±0.13 US gal)

•

Refuel.

After refuelling:

CAUTION

THE TANK MUST ALWAYS BE CLOSED CORRECTLY BY TIGHTENING THE CAP
CLOCKWISE UNTIL IT LOCKS INTO PLACE.

MAKE SURE THE CAP IS TIGHTLY CLOSED.

03_04

Rear shock absorbers adjustment (03_04, 03_05)

The shock absorber has an adjuster ring (1) for setting spring preload (2) and a locking
ring nut (3).

NOTE

IT IS POSSIBLE TO VARY THE PRELOAD OF THE SHOCK ABSORBERS DE-
PENDING ON THE LOAD ON THE VEHICLE (PASSENGER OR HEAVY LOAD).

NOTE

CARRY OUT MAINTENANCE OPERATIONS AT HALF THE INTERVALS SPECI-
FIED IF THE VEHICLE IS USED IN PARTICULAR RAINY OR DUSTY CONDI-
TIONS, OFF ROAD OR FOR TRACK USE.

3 Use

Summary of Contents for V9 Bobber 2016































































































































Search results

Summary of Contents for V9 Bobber 2016

Reviews:

Brands by name

Popular brands

MOTO GUZZI V9 Bobber 2016, Owner'S Manual

Search results

Summary of Contents for V9 Bobber 2016

Reviews:

Brands by name

Popular brands