MOTO GUZZI V9 Bobber 2016, Owner'S Manual

Page: 34 / 126

02_30
02_31
02_32
Gear Shift "gear shift indicator threshold"
The gear shift indicator threshold is set in this mode.
Press and hold the "MODE" selector to access the setting mode from the menu. Press
the "MODE" button up or down to select the required setting.
•
SET GEAR SHIFT L: 4500 rpm (run-in revolutions)
•
SET GEAR SHIFT H: 8000 rpm
For each threshold setting, each upward press of the selector increases the value by
100 rpm, and each downward press decreases the value by 100 rpm. Press and hold
the "MODE" selector to save the value set, exit the mode and return to the configu-
ration menu.
At the first key-on after setting, the instrument panel applies the last value set. When
the engine speed threshold set is exceeded, the message "GEAR SHIFT" is shown
on the display and the general alarm warning lamp lights. The general alarm warning
lamp flashes when the lower threshold value is exceeded, and lights steadily when
the upper threshold is exceeded. The general alarm warning lamp extinguishes once
the engine speed drops below the threshold set.
The number of maximum engine revisions is 6800 rpm.
34
2 Vehicle