Motion CM-40, Manual, Page: 33 / 92

11
12
12.1
12.2
12.3
12.4
12.1
12.2
12.3
12.4
3 s
MOTION CM-40 DC VERTICAL MOTOR
Move to favorite position
Reset the favorite position
Center
To move your blind to the favorite position the blind has to be at a
different position than the favorite position.
Move the blind to a new desired favorite position.
Press the program button on the motor to activate
program mode. The blind starts stepping.
Hold the center button to save this favorite position.
The blind shortly stops stepping indicating the
favorite position has been saved succesfully.
Press the program button on the motor to de-activate
program mode. The blind stops stepping.
Pull control: Remote control:
Pull control: Pull and hold to move the
blind to the favourite position.
Remote control: Hold the centre button to
move the blind to the favourite position.
Hold the pull for 3 seconds to move the blind to
the desired favorite position.
Hold the pull for 7 seconds to remove the favorite
position.
Move the blind to a new desired favorite position for
slide and tilt.
Pull and hold the chain for approximately
7 seconds until the blind slides left and right.
English
15