page 9
SportVue
Fig. 6 – Preparing the Visor
Attachment
1.
Remove the double-sided-tape backing from the clip foot base and carefully place the clip
onto the helmet, making sue the inside foot base lip is located on the top edge of the visor.
2.
Firmly push the clip onto the visor, using pressure on inner and outer foot base with your
thumb and forefinger. (see fig. 7)
3.
Fit the HDM Unit into the base.
4.
Check the location while you are wearing the helmet.
The pressure sensitive adhesive (PSA) will not cure completely for 24 hours, but is safe for a test
ride within 10-15 minutes. If you placed the HDM Unit in the wrong place, the PSA will allow one
or two removals before it loses its adhesion.
Insert photo of mounting clip onto visor
Fig. 7 – Attaching the HMD mounting clip
Motorcycle Sending Unit Installation
