AGITO
AGITO User Manual OS 5.0 Nova
46 - Operation
»
INTRODUCTION TO: REPEATABLE MOVES MODE
»
REPEATABLE MOVES MODE: TURNING ON
Repeatable Moves is a hybrid mode that provides basic record and playback of AGITO movement. It is recommended that initial setup
is done within either Sports or Trax mode dependant upon the drive-ends in use. Once configured / calibrated, the user can then access
Repeatable Moves.
»
REPEATABLE MOVES: FIRST USE
SELECTING A CLIP
When using Repeatable Moves you will initially need to either select an empty Clip or over-right a pre-existing clip. The system will
automatically prompt the user to make this decision.
Once selected the user will be prompted to keep the default (previous name) or rename the clip.
RENAMING A CLIP
If the user decides to rename the clip, they will be able to enter a 8 character name
SELECTING A MODE
Once the Clip name has been chosen, the user will need to manually select the Drive-end currently attached to the AGITO.
ALWAYS ENSURE THE CORRECT DRIVE-END IS SELECTED, FAILURE TO
DO SO MAY RESULT IN DAMAGE TO THE SYSTEM
