background image

Moving the microscope 
 

  If possible, avoid moving the stereomicroscope.  

  Carry the microscope in both hands. One hand should hold the microscope column (14), and the other 

should support it under the base (17).  

  Maintain the stereomicroscope in a vertical position.

 

 

Reparation 

 
If the stereomicroscope needs repairing, or revision by authorised personnel, we would recommend that it be 
stored in its polystyrene box and returned to the distributor. Attach a note with a description of the problem, 
or details of the required revision.  
 
 

Warrantee 
 

All MOTIC microscopes are warranted against any manufacturing defect for a 5 year period. Damage 
occurring by any unauthorised repair work, or occurring through misuse or modification of the microscope will 
not be included under the conditions of the warrantee. Bulbs and fuses are not under warrantee.  
 
The warrantee service is provided by MOTIC, or its authorised distributors. Defective products will be 
repaired without charge when returned to MOTIC, or one of its distributors. Transport costs will be covered 
by the purchaser. 
 
 

OWING TO POSSIBLE MODIFICATIONS AND IMPROVEMENTS IN THEIR MANUFACTURE, CHANGES 
MAY OCCUR TO STEREOMICROSCOPES WITHOUT PRIOR NOTICE.  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

-9- 

Summary of Contents for PS10100001










Reviews: