1.
Important
The Motic DSK is a side-by-side dual viewing stereomicroscope system. As it allows two
observers to sit side by side, it is ideal for education and training purposes. Note that
there are few restrictions on the installation location of this attachment.
The orientation of the images observed by the primary observer and the secondary
observer is the same in both the vertical and horizontal directions.
1.1
Getting Ready
1. This manual pertains only to the DSK attachment. Before using this attachment in
conjunction with the SK500/SK700 Stereo microscope and associated options, make
sure that you have carefully read and understood the corresponding manuals, and
that you understand how the various components of the microscopic system are
used
together.
2. The DSK attachment is a precision instrument. Handle it with care and avoid
subjecting it to sudden or severe impact.
3. Do not use the attachment anywhere where it may be exposed to direct sunlight,
high temperature and humidity, dust, or vibrations. (For operating environment
conditions, see Section, “SPECIFICATIONS”
4. Before replacing the pointer illumination bulb, be sure to set the main switch to
“(OFF)”, unplug the power supply unit and other cords and wait until the bulb and
its surroundings have fully cooled down.
5. be sure to use only the specified tungsten bulb when replacing the pointer
illumination
bulb.
Applicable bulb 6V1OWGE (mfd. by Hosobuchi Electric Lamp)
6. Do not plug the pointer illuminator cord into any unit except the Motic deliverd power
supply unit.