manualshive.com logo in svg

Motic DSK Series, Manual, Page: 11 / 19

Share
Download
Motic DSK Series Manual Download Page 11

 

 

11

5.

 

Specification

 

 

Item 

Specification 

1.  Distance between  primary 
and second- ary observer tubes 

500 mm parallel (side by side) 

2. Image orientation 

Same at primary and secondary observers’ positions 
(erect image) 

3. Eyepoint height 

Same at primary and secondary  observers’ positions

4. Intermediate attachment 
magnification 

1X at primary and secondary  observers’ positions 

5. Maximum field of view (mm) 

23 mm dia. at primary and secondary  observers’ 
positions 

6. Mounting base 

Mounted on SZX2-STL2 using SZX2-FOFH. Cannot 
be mounted on other bases. 

7. Pointer 

Shape 

Arrow, upward (when observed through binocular 
assembly) 

Color Green 

Movement Joystick 

(Controllable only by primary observer) 

 Types 

2 types  –  Ever bright/Flash 
(Switchable only by primary observer) 

8. Pointer power supply 

TDO power supply unit (110 -- 120 V, 220 -- 240 V; 
50/60 Hz). Illumination brightness switchable in 3 
steps. 

9. Pointer illumination lamp 

0.05W LED 

10. Dimensions 

600(W) x 260.5(D) x 199(H) mm (intermediate 
attachment  thickness 56 mm) 

11. Weight 

37.2 kg (include base) 

 

 

Summary of Contents for DSK Series




















Reviews:

No comments