32
33
Mother’s Choice |
Flair II
Mother’s Choice |
Flair II
Removing the headrest trim:
Adjust the booster seat headrest to its highest
position. Separate velcro from around sash guides and back of headrest to remove
cover.
Removing the body trim:
Separate velcro at the back of the seat. Pull around the
armrest and remove cover off the seat. Ensure you free the elastic under seat and
that it is not caught on cup holders.
•
The seat covers can be machine washed in lukewarm water on the ‘delicate’ cycle.
•
Tumble dry for 10 - 15 minutes on low heat.
•
DO NOT BLEACH
•
DO NOT DRY CLEAN
•
DO NOT IRON
•
Once they are fully dry, they should be refitted in the following sequence:
Fitting the body trim:
Start by fitting on the armrest,
then place the trim on the back. Pull elastic under the
base and over the cup holders, then fasten the velcro
under the base and on the back of the trim.
Fitting the headrest trim:
Extend the booster seat
headrest to its highest position then fit the headrest
cover by stretching it over the headrest and securing
velcro tabs around the sash guide.
Fabric Cleaning and Care Instructions
CARE AND MAINTENANCE
