24
25
Mother’s Choice |
Flair II
Mother’s Choice |
Flair II
1. Loosen the harness to gain easy access to the
splitter plate
located on the back of the child
restraint
. U
ndo the harness straps from the
splitter plate, and pull the straps out through
the harness slots.
2.
Slide the straps to the back of the child restraint
(between the seat back and armrest opening),
and pull the buckle tongues to the end of the
straps. Fold the free end of the harness over.
3.
Continue to roll the harness strap with the
buckle tongue contained. Tuck the rolled
strap into the seat trim for storage.
4.
To store the harness buckle, lift the flap to
reveal a storage space in the base of the seat.
Simply push the buckle down into the gap,
and place the flap back into position to cover.
5.
Lift the trim up to expose the adjuster strap.
Pull the adjuster strap to full length, then roll
the strap tightly until it reaches the harness
release lever. Pull cover over, back into
place.
ROLL
ROLL
FOLD
LIFT
FLAP
PULL COVER OVER
TUCK INTO
TRIM
INSTALLATION
Removing the Harness for Booster Use
