mothercare adjust with me highchair, User Manual

Page: 9 / 20

assembling the highchair for stage 2 & 3
fig 11
Insert a barrel nut into the predrilled
holes at either end of the wooden brace,
using a flat head screw driver to ensure
that the slot is horizontal. Then using
the Allen key and screws provided,
attach the wooden brace and both
metal braces to the legs.
Please note: do not fully tighten any of
the screws yet.
8
fig 12
If required, select the desired position
and firmly push the seat into the chair
frame until the front of the seat is level
with the front of the high chair. Please
ensure that the seat isn’t twisted by
selecting slots of a corresponding height
and that the rear of the seat extends
past the legs by at least 20mm.