Buttons' Definition
5
Back
Leg
Massage Intensity :
Back = Massage # 1
Leg = Massage # 2
Press once to start each group
(Default intensity is 1).
Press 2nd time to increase to 2.
Total 5 intensities. A buzzer will
beep at 5.
If Leg and/or Back is on, entering Wave
Mode #1 / #2 will start at current intensity
(not default 1).
5 (beep)
5 (beep)
0
Intensity
Press
(times)
5 10 15
Wave Mode #1 :
MSG #1 on, MSG #2 off; then
MSG #1 off, MSG #2 on (in cycles...).
Press once to start (Default period is 5
seconds).
Press 2nd time to 4 (faster).
time
MSG #1
MSG #2
ON
OFF
ON
OFF
5~1 seconds
Wave Mode #2 :
MSG #1 on, MSG #2 on; then
MSG #1 off, MSG #2 off (in cycles...).
Run Simultaneously.
Other is the same as Mode #1.
time
Group #1
Group #2
ON
OFF
ON
OFF
5~1 seconds
Total 5 frequencies. A buzzer will beep at 1
(fastest).
1 (beep)
0
Cycle
Period
Press
(times)
1 (beep)
5 10 15
5
Default period is not able to be changed by end-user.
5 (beep)
5 (beep)
M1 Extend
M1+M2 Extend
M1+M2 Retract
M1 Retract
M2 Retract
M2 Extend
Massage
OFF
Back
Leg
Press to stop all massage motors.
1
S
2
1
The "1" and "2" are buttons for memory position. Make
the actuator to the position where you want, push and
hold for 2 seconds then push button "1" or "2", the LED
will flash which means the memory function is done. The
memory function can only be recovered rather than
erased.
Memory Position Setting:
Hold the button "1" or "2", the actuator will operate to the
corresponding position then stop. The LED will flash
during the operating time and then extinguish when the
actuator reaches the corresponding position.
When button "1" or "2" is released before the actuator
reaches the corresponding position, the actuator will stop
and the LED will be extinguished.
Operating:
c 2014 Moteck. Printed in Taiwan. The contents of this publication are the copyright of the publisher and may not be copied or
even extracted unless prior written permission is authorized.
1F-1, No.79, Sec.1 ,Xintai 5th Rd., Xizhi Dist.,
New Taipei City 22101, Taiwan (R.O.C.)
E-mail:[email protected]
http://www.moteck.com.tw
TEL:+886-2-2698-1220
AX:+886-2-2698-1324
MO-FAM-1-I-011-140910A
F
2
S
