Motech FG 700F Series, Operating Manual

Page: 3 / 30

SAFETY PRECAUTION
SAFETY CONSIDRATIONS
The Model FG700S/F series Direct Digital Synthesis Function Generator has been designed and tested
according to EN61010-1:2001 and EN61326:1997.
SAFETY PRECAUTIONS
SAFETY NOTES
The following general safety precautions must be observed during all phases of operation, service, and
repair of this instrument. Failure to comply with these precautions or with specific warnings elsewhere in
this manual violates safety standards of design, manufacture, and intended use of the instrument. The
manufacturer assumes no liability for the customer‘s failure to comply with these requirements.
BEFORE APPLYING POWER
Verify that the product is set to match the available line voltage is installed.
SAFETY SYMBOLS
Caution, risk of electric shock
Earth (ground) terminal
Equipment protected throughout by double insulation or
reinforced insulation
Caution (refer to accompanying documents)
Equipment complies with current EU directives
Protective earth (ground) terminal
Chassis terminal
Indoor use only
DO NOT SUBSTITUTE PARTS OR MODIFY INSTRUMENT
Because of the danger of introducing additional hazards, do not install substitute parts or perform any
unauthorized modification to the instrument. Return the instrument to a qualified dealer for service and
repair to ensure that safety features are maintained.
INSTRUMENTS WHICH APPEAR DAMAGED OR DEFECTIVE SHOULD BE MADE
INOPERATIVE AND SECURED AGAINST UNINTENDED OPERATION UNTIL THEY CAN
BE REPAIRED BY QUALIFIED SERVICE PERSONNEL.