Motech FG 700F Series, Operating Manual

Page: 14 / 30

8
Rotary with Push button (FG700S/F Series)
a. Change to the next selection when turning clockwise.
b. Change to the previous selection when turning counterclockwise.
c. In frequency editing, turn clockwise to increase the frequency setting.
d. In frequency editing, turn counterclockwise to decrease the frequency setting.
e. When the cursor shows up in frequency editing, press the rotary push button to
cancel the cursor.
f. In rotary push trigger/gate function, press the rotary push button to generate
trigger/gate signal manually.
Pulse Width Adjustment Knob (FG700S Series)
a. Adjust the pulse width of the square wave.
DC/Offset Adjustment Knob (FG700S/F Series)
a. Adjust the DC level if the function output is set to DC.
b. Adjust the offset level if the output offset is on.
Pulse Width Adjustment Knob (FG700S/F Series)
a. Adjust the amplitude of the function out.
Internal AM/FM Adjustment Knob (FG700F Series)
a. Adjust the internal AM/FM modulation factor output.
2.2 Opening Screen
Connect the power cord and turn on the function generator.
FG700S Series
F G - 7 0 0 S
V e r s i o n : x . x x
FG700FSeries
F G - 7 0 0 F
V e r s i o n : x . x x
a. Press the and together to reset the function generator. This reset function sets the
function generator to default of 1KHz sine wave output at 20dB attenuation amplitude.
b. To turn off the beep of the keypad, please press and keys together for FG700S
series.
c. To turn off the beep of the keypad, please press and key together for FG700F
series.