Mostec M2740 Instruction Manual Download Page 8

 

 

 

7 Warranty  

 

 

This simulator is supplied with a one-year warranty against significant deviations in material and 
workmanship.   

If repair or adjustment is necessary and has not been the result of abuse or misuse within the designated 
period, please return – freight pre-paid – and correction will be made without charge. Mostec will 
determine if the product problem is due to deviations or customer misuse.   

Out of warranty products will be repaired on a charged basis.   

Exclusions 

 

The warranty on your instrument shall not apply to defects resulting from:  

 

• Improper or inadequate maintenance by customer  

 

• Unauthorized modification or misuse  

 

• Operation outside of the environment specifications of the products  

 

 

8 Return of Items 

 

 

Authorization must be obtained from our Customer Service Department or authorized distributor before 
returning items for any reason. A “Return Goods Authorization” (RGA) form is available through our 
Authorized Distributor. Please include data regarding the reason the items are to be returned. For your 
protection, items must be carefully packed to prevent damage in shipment and insured against possible 
damage or loss. Mostec Instruments will not be responsible for damage resulting from careless or 
insufficient packing. A restocking charge will be made on all unauthorized returns.   

NOTE:    

Mostec Instruments reserve the right to make improvements in design, construction, and appearance of 
products without notice. 

 

  

 
 

Summary of Contents for M2740









Reviews: