Moser 1588, Operating Manual

Page: 12 / 116

ENGLISH
12
de
en
fr
it
es
pt
nl
da
sv
no
fi
tr
pl
cs
sk
hr
hu
sl
ro
bg
ru
uk
et
lv
lt
el
ar
Disposal
Handle with care! Environmental damage in
the event of incorrect disposal.
f
Discharge batteries prior to disposal!
f
Correct disposal will ensure environmen-
tal protection and prevent any poten-
tially harmful impact on people and the
environment.
Adhere to the relevant legal requirements when dispos-
ing of the appliance.
Information on the disposal of electrical and elec-
tronic appliances in the European Community:
Within the European Community, national
regulations are specified for the disposal of
electrical appliances, based on EU Waste
Electrical and Electronic Equipment Directive
2012/19/EC (WEEE). In accordance with this,
the appliance can no longer be disposed of
with the local or domestic waste.
The appliance will be accepted free of charge
by local collection points or recycling centres.
The packaging for this product is made from
recyclable materials. Dispose of this in an
environmentally friendly manner by recycling it.
Problem elimination
Blade set is cutting badly or pulling hair out.
Cause: Blade set is dirty or worn out.
f
Clean and oil the blade set (Fig. 8/9); if this does
not resolve the problem, replace the blade set
(Fig. 7).
Skin injury
Cause: Too much contact pressure on the skin.
f
Reduce contact pressure when cutting close to skin.
Cause: Damaged blade set.
f
Check whether the blade edges were damaged dur-
ing use and replace the blade set if necessary.
Battery operating time is too short.
Cause: Blade set and housing opening are dirty.
f
Clean and oil the blade set (Fig. 8/9).
Cause: Battery power indicator is imprecise.
f
Fully discharge the battery before fully recharging it
in one uninterrupted charging process.
Cause: Battery is worn out.
f
Have the battery replaced at a service centre.
Battery power indicator light does not light up.
Cause: Appliance has not been correctly placed on the
charging stand.
f
Ensure that the hand-held appliance has been cor-
rectly placed on the charging stand.
Cause: Defective power supply.
f
Ensure that the plug-in transformer is plugged into
the mains socket.
f
Check the mains cable for possible damage.