Mosa SIP 4600B, User Manual

Page: 89 / 129

M
OSA 4600B SIP Line user manual
87
In the Mode of the table below, S: means Server Mode only, C: Client Mode only, Blank: share
function.
Group Field Descriptions Default Value Mode
Dial Ending
Time
Dial Ending
Time
Generally “ # ” is the last character of the number,
and that means “end of dialing”. If no “ # ” is dialed,
system will wait until dial ending time out. If “0” is
set, it means to disable this function
3 sec
No Answer
Forward Time
time When no one answers the incoming call of
channels for a period of time configured here, the
call is forward to specified destination.
25 sec
Slave Device Slave ID Define a MOSA 4600B SIP Line as the backup
machine. This machine will find the backup MOSA
4600B SIP Line if all lines are busy. The phone
number of the backup machine has to be full
number, i.e. Country Code + Area Code +
Telephone Number and the related connection
information is registered at PhoneBook or
Netmosa/.
Blank S
Outbound Call
Progress Tone
Control When user make outbound to PSTN call, calling
side might not hear the ring back tone from called
side immediately. This function generates progress
tone to calling side before called side machine
generate ring back tone. This tone comfort calling
side to wait patiently until call route is built.
Disable: Don't send Progress Tone (silent)
Ring Back Tone: Send ring back tone continually
Confirm Tone: Send short confirm tone then silent.
If music ring back tone is enabled, calling side can
hear clear music.
Disable
Offnet Dial-In
Authentication
Control Receive caller ID from PSTN incoming call for
authentication. This is the special application of
mobile extension. When it is enabled, the caller ID
of PSTN incoming call (mobile phone) has to be the
same as the setting in " Offnet To: " number in Web
Folder: Channel/Configuration, otherwise, the
incoming call is rejected.
Enable/Disable
Disable C
11.5 Advanced-MOSA\Numbering Plan
This Management Web is divided into Server Mode and Client Mode and its Web content is
different. Please contact distributor to get free Firmware. Use different firmware can has different
mode.