Mosa SIP 4600B, User Manual

Page: 104 / 129

102
Group Item Description Default Value
NAT WAN IP Address Input NAT WAN IP helps this machine to
penetrate NAT without using STUN Server.
When you use this function, the port number
inside and outside NAT device must be
consistent.
If NAT device use dynamic IP (PPPoE), you
can input 255.255.255.255, the system will
seize WAN IP of NAT device. If you use
dynamic IP, works with VDNS may be
recommended; otherwise, registration is fail if
IP is changed.
Attention: The RTP port number (usually
10000) and Signaling port number (usually
5060) inside and outside NAT device must be
consistent. And, Configure Server Port to this
machine is also required
255.255.255.255
NAT WAN
Active IP Address Current used NAT WAN IP Read only
11.12 Advanced-SIP\Diagnosis
If there is any condition of network problem, you can refer to this page for related information.
Click Clear to clean the data on this page.