background image

5

2. Safety

2. 

Safety

2.1  Safety information

Always respect the warnings contained in this manual and present on the decal applied to the machine.
This allows the machine to be used safely, avoiding damage to property and injury or death to people.
The following words and symbols were used to identify important safety messages.

Symbol 

 identifies important safety messages on the machine, in the manual and elsewhere. When you 

see this symbol, follow the instructions in the safety messages.

 

DANGER

• 

This word indicates a situation of imminent risk that, if not avoided, could cause serious injury 

or even death to people and serious damage to property.

 

WARNING

• 

This word indicates a potential risk situation which, if not avoided, could result in serious inju

-

ry or even death to people and serious damage to property.

 

CAUTION

• 

This word indicates a potential risk situation that, if not avoided, could cause minor or moder

-

ate injuries.

 

It can also be used to prevent dangerous operations that can cause damage to the machine.

The following terms are used to transmit the information to be followed to the user, to avoid damage to the 
machine.

Important

• 

If the precautions described are not observed, the machine could be damaged and its useful life re-
duced.

Note:

• 

This word is used to indicate further useful information.

Summary of Contents for RENTAL GE 50 KR-5





































































Reviews: