![Mosa MS 200 S Use And Maintenance Manual Download Page 15](http://html1.mh-extra.com/html/mosa/ms-200-s/ms-200-s_use-and-maintenance-manual_1836913015.webp)
MAINTENANCE INSTRUCTIONS
MS 200 S - MSG 200/CHOPPER
MSG 201 S 50/60 Hz
© MOSA
1.0-09/95
18/09/95 10160M9.2 - GB
M
9.2
EVERY 100 WORKING HOURS
Replace air filter element and spark plug (4) (Champion
L87YC). Gap should be 0.028" (0.7 mm) (refer to 50 Working
Hours instructions).
Clean the fuel filter (B).
To check and adjust the carburetor linkage, do as follows:
Stop the engine, remove the capacitor side cover. Make sure
that the spring (F) is hooked.
Push the electromagnet contrast lever (H) upwards to annul
completely the running of the electromagnet shaft (G).
Keep constantly the contrast lever (H) in this position and the
carburetor throttle con-rod (K) completely down. Turn the
adjusting screw (I) so as to shift the pad (J) and obtain the
desired gap 0.04-0.08 inch (1 - 2 mm) between the con-rod
(K) and the pad (J).
EVERY 200 HOURS
Check exhaust port and muffler for excessive carbon deposits.
If necessary remove deposits from cylinder head, exhaust
port and muffler.
If cylinder head is removed it must be tightened to 8.8 fL-
Ibs.(12 Nm) torque when reassembling.
Check welding cables and replace if necessary.
EVERY 1000 HOURS
Take the welder to an authorized service center for a complete
check and overhaul as required.
Summary of Contents for MS 200 S
