Mosa MS 200 S, Use And Maintenance Manual

Page: 13 / 48

MAINTENANCE MS 200 S - MSG 200/CHOPPER
MSG 201 S 50/60 Hz
© MOSA 1.0-09/95
18/09/95 10160M9 - GB
M
9
ATTENZIONE
!
MSG and MS have been designed to reduce maintenance to a minimum.
Components are, however, subject to normal w ear and accumulation of deposits and periodic checks, cleaning and/or
replacement and overhaul should be performed according to the following schedule:
Checks to be performed
Sparkplug C R
Air filter C R
Carbon deposits C
Cables C
Fuel filter T
Carburetor linkage T
Engine (including ignition, carburetor, etc.) O
EVERY
50 100 200 1000
Legend:
C = cleaning
T = test/check
S = replacement
O = check and general overhaul (as required)
☞ ☞
☞ ☞
☞
N.B.: All warning and decals should be checked once a year and replaced if missing or unreadable.
•
Have qualified personnel do maintenance and troubleshooting work.
•
lf possible, turn the engine off before working inside the machine. If for
any reason the machine must be operated while working inside, pay
attention to hot surfaces which may be protected when the machine is
open.
•
Remove guards only when necessary to perform maintenance, and
replace them when the maintenance requiring their removal is complete.
HOT surface
can
hurt you
MOVING
PARTS
can injure