‐
6
‐
power.
(2). AC Receptacle: AC output receptacles for connecting AC devices.
(3). Main Switch: This switch turns ON or OFF DC output of the mobile
power, and AC Switch is available only after the main switch is turned
on.
(4). Cigarette Lighter Receptacle: 12V DC output receptacle for
cigarette lighter plug.
(5). USB Receptacle: 5V DC output receptacle for USB plug.
(6). Anderson Port: 12V DC output receptacle for Anderson SB50 plug.
(7). 6mm Port: 12V DC output receptacle for 6mm plug.
(8). LCD Display: Display remaining capacity of the battery,
input/output watts, remaining operation hours or charging hours of the
battery, battery voltage, total running time, and
fault warnings. When
the mobile power is charging, the battery segments in the LCD screen
will blink. The mobile power is fully charged when all battery segments
stop blinking and remain solid.
(9). Display button
▲
: You can activate the display backlight or value
display
for remaining capacity of the battery by pressing the button
once, and for total running time by pressing the button twice.
(10). Display button
▼
: You can activate the display backlight or value
display for battery voltage by pressing the button.
(11). Display button
S
: You can activate the display backlight by
pressing the button, and the factory or
authorized dealer can use this
button to initialize the LCD Display.
(12). Ready LED: Ready LED light comes ON when the AC output is
ready.
(13). Warning LED: The light comes ON and flashes when the following
problems occur:
AC output is overloaded.
AC output is short-circuited.
AC output is under voltage.
AC output is over voltage.
Over temperature in the inverter.
