3.
Mechanical Dimensions
198 mm
191 mm
1
2
3
4
5
6
7
3
Oxygen value as %
Led display
Keypad. For adjustment and parameter exchange.
Siren and flasher
Oxygen Sensor
Cable Inlets
Cable Inlet Part Cover
Sensor inlet should be covered for dust and
particle penetration during installation.
Location should be selected carefully to
prevent any direct air flow to the Monitor
from other machinery and / or ventilation.
Do not install the unit nearby any heat source.
1. Electrical connections should be started after finishing the installation.
Monitor can easily be connected to the wall with installation fittings that are inside the package.
After deciding proper location, you can drill the wall. Monitor will be installed and screwed accordingly.
