6.
In securing the hoist to the ceiling it is very important to
keep frame level and not to conform to the irregularities
of the ceiling.
Securing the Ultimate 1000 Lift
A.
Place lag screws in three corners and tighten until
uniformly snug and firm.
B.
Detach straps from screw hooks, tighten lag screw in the
fourth corner until the metal washer is firm against the
frame and does not rattle. A good method is to make this
adjustment while the motor is in operation. When in
perfect alignment the motor will run smoothly and
quietly.
C.
Insert and tighten the center (2) lag screws until the
metal washer touches the frame and does not rattle.
Suspended Monorail Track Mount on a
Wood Joist Ceiling Mounted
Perpendicular to the Joists
Joist Clamp
SP-012 EL
Plain Support Bracket
SP-026G
Monorail G Track
RP-015G
Threaded Rod
SP-021
Summary of Contents for ULTIMATE 1000
Page 1: ...Installation Suggestions ...
