TO LIFT CASKET:
1. Lock the casket closed.
2. Attach one end of the black nylon casket strap to the
corresponding white nylon strap hanging from the machine.
3. With the free end of the black nylon casket strap,
weave up and between the casket side bar and the casket,
making sure you are between the end hinge and the
middle hinge (hinges connect the side bar to the casket.)
4. Bring the casket strap over the top of the casket.
5. Weave the strap down the other side between the
casket and casket side bar. Again, making sure you are
between the end hinge and the middle hinge.
6. Bring the casket strap up on the outer side of the
casket side bar.
7. Attach the free end of the casket strap to the
corresponding white nylon strap hanging from the other
side of the machine.
8. Continue to do the same for the other two casket straps.
9. Once this has been done to all three straps, you are
ready to lift the casket.
BLACK NYLON STRAPS
:
For use with lifting caskets and cadavers weighing over 400 lbs.
Yearly replacement recommended.
These are the black
nylon straps, which are 8 feet in length and have a metal
“D” ring at each end. These are to be used when lifting
a casket and remains over 400lbs.. The recommended way to
lift a casket is to:
Summary of Contents for Ultimate 1000 Lift ML-013P
Page 1: ...Manual Operation Maintenance Models ML 013P ML 014W ...
Page 16: ......
