MORTARA INSTRUMENT SPECIFICATION
MIS-11-151-00 Rev. 1
© 2001 Mortara Instrument, Inc.
CONFIDENTIAL
PAGE 10 OF 26
STEP 4 Installation of Printer and Keyboard Shelf
Lay Upper Column Assembly (Item 25) on floor as shown and install Printer Shelf
(Item 23).
Place Upper Column Assembly (Item 25) on
its back. Place Keyboard Shelf Assembly,
as shown, and affix with Qty 4, M4 x 8mm
Pan Head Phillips Machine Screws (Item 7).
Keyboard Shelf Assembly
Place the Printer Shelf on the
support tubes as shown. Slide
the shelf rearward until it
makes contact with the upper
case. Insert, but do not
tighten, Qty 4, M4 x 8mm Pan
Head Phillips Machine Screws
(Item 7) into the threaded
holes.
Finally, tighten the four Pan Head Phillips
Screws on the Printer Shelf. (Above)
Printer Shelf
