Morso 7670, Installation And Operating Instructions Manual

Page: 8 / 24

8
Distance to walls and lintel
When the stove is positioned near combustible materials, observe all current local and national
building regulations with regards to clearances. Whatever regulations apply to your area, do
not in any case install the stove within 8 inches of combustible materials around the sides or
16 inches above the top of the stove (fireplace installations require greater clearances above
the stove - see below in the clearance chart). These distances may need to be increased if the
materials are sensitive to heat. Note also that wall paper and other decorative materials may
become detached with the effects of heat and care should be taken to ensure that they do not
fall towards the stove in such an event.
1.5 Positioning the stove
The stove must be installed on a non-
combustible wall.
The wall-mounting fixture is provided with four
holes for mounting expansion bolts in the wall.
The bolts must be sized to secure that the wall
and the materials it is made from are capable
of supporting the stove. If in doubt, contact an
expert. The weight of the empty stove is 128
kg (282 lbs.). The wall-mounting fixture may be
used as drilling template.
Mount the wall-mounting fixture on the wall. If
the flue exit is wanted to the rear, build a wall
bushing correctly into the wall (see illustration).
Lift the wood stove in place so that it rests on
the bottom part of the wall-mounting fixture, and
secure it again to the fixture by means of the
screws included.
D
D
Min. 11¾" Min. 300 mm
D-D
Revisions Rev. Sign.:
Title:
Drawing no.:
1:5
Væghængt
Morsø 7600
KDU
25.03.08
A3
Assembly
130,21 kg
Date of print: 01-03-2010
C:\UDV\tegninger\7600\7600 Assembly.SLDASM
7600-81 a
- Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:
Date:
Side 2 of 2