9
DK ENG
1.0 Installing your Morsø stove
1.1 Unpacking the stove
Morsø 00 weighs 8 kg. The stove is heavy and therefore it is strongly recommended that
when unpacking it is undertaken by two people. Carefully lift the stove from the wooden pal
let and set it centrally on the base.
1.2 Installing the stove
The stove and chimney installations MUST comply to all current National and Local Build-
ing Regulations; your approved Morsø dealer or your local building control officer can advise
regarding this. Ultimately, it is you and your installer who is responsible that the installation
complies.
1.3 Chimney sweep
It may also be wise to consult your local chimney sweep before installing the stove. After your
stove has been installed, it is advisable to have the chimney checked and swept at least once
a year. In any case, if your chimney has not been used for some time, it should be inspected
for cracking, bird nests, etc. before it is put back into use.
1.4 Stove placement/clearance requirements
Minimum Clearance requirements apply if the stove is placed near to combustible materials.
Permitted clearances to combustible materials are also indicated on the data plate on the rear
of the stove.
Stove type
Behind the stove (A) to the sides of the stove (B) to soft furnishings
Morsø 00
uninsulated flue
00 mm
50 mm
00 mm
Minimum clearances to combustible surfaces:
Summary of Contents for 2040
Page 31: ...31 ...
